Be part of the E-volution

Available from September 18th, 2023

A new interface

A new interface

Discover the new firmware…

for your Evolution oven.

Discover the new Evolution Firmware!

Watch Fulvio De Marco's video and discover the 2.0 updates!
0 days 00 hr 00 min 00 sc

First of all, the updates.

1

Command

You will be able to set the temperature of both resistances.

2

Warning

At the end of every phase, there will be an alarm to keep you always updated.

3

Safety

After 60 minutes of inactivity, the resistances and light will turn off.

Take control of your Evolution

With the new Firmware 2.0, you can set the temperature of both resistances, both the upper and the lower one.

Improved user experience 🍕

Now we have the ability to set the deck's temperature with its related percentages, the control will maintain the lower temperature within the desired value.

Acoustic signal for each phase

At the end of every phase, there will be an alarm to keep you always updated.

Phase 1

End of phase:
10 seconds
Single intermittent beep

Phase 2

End of phase:
10 seconds
Double intermittent beeps

Phase 3

End of phase:
20 seconds
Double intermittent beeps

Safety
comes first.

Did you forget the oven on?

Don't worry!

The oven will automatically go into standby after 60 minutes of inactivity, turning off the resistances and chamber light.

How do you install the new Evolution Firmware?

Watch the video and find out how to do it!

Enter your email and receive:
- New Evolution Firmware 2.13
- Evolution Program (to update cooking programs)

You will receive the email within 24 hours